Configuring RFC 2833 Payload
You can configure the RFC 2833 payload.
|
➢
|
To configure RFC 2833 payload: |
|
1.
|
Open the RTP/RTCP Settings page (Setup menu > Signaling & Media tab > Media folder > RTP/RTCP Settings). |
|
2.
|
Configure the following parameters: |
|
●
|
'RTP Redundancy Depth' (RTPRedundancyDepth) - enables the device to generate RFC 2198 redundant packets. |
|
●
|
'RFC 2833 TX Payload Type' (RFC2833TxPayloadType) - defines the Tx RFC 2833 DTMF relay dynamic payload type. |
|
●
|
'RFC 2833 RX Payload Type' (RFC2833RxPayloadType) - defines the Rx RFC 2833 DTMF relay dynamic payload type. |
|
●
|
'RFC 2198 Payload Type' (RFC2198PayloadType) - defines the RTP redundancy packet payload type according to RFC 2198. |